The Walkthrough
Everything the box does, in the order you'll use it, with a boom-bap recipe at the end of each section. Based on the Boom Bap Box v1.2.2 manual, written for old-school 80s and 90s hip hop. Tempo, swing and sound picks marked (try this) are suggestions, not rules.
1 · Know the box
Boom Bap Box turns the FM-1 into a groovebox with five parts playing at once: a 909, an 808, two 303 bass synths (303A, 303B) and a BREAK player. Each part can play its own pattern. There are 32 patterns, a 192-bar song, knob recording and per-step tricks.
The controls
| Control | What it does |
|---|---|
| MASTER | Volume. |
| ALGORITHM | Picks the part: 909, 808, 303A, 303B, BREAK. |
| PRESETS | Picks the pattern (on HOME: all five parts; on a part's screen: that part only). |
| SELECT | Next/previous page. Hold a step and turn it to set that step's chance of playing. |
| KNOB 1-4 | The four values shown at the bottom of the screen. |
| OCT- / OCT+ | Move through steps 16 at a time (up to 64). On HOME: patterns 1-16 / 17-32. |
| White keys (16) | The 16 steps of the bar. On HOME they pick patterns. |
| Black keys | Pick drum tracks (BD, SD, toms, hats...). On BREAK they play slices. On HOME they mute parts. |
| HOME | Pattern overview, with all five parts and mutes. Press twice for the song. Hold HOME for shortcuts (below). |
| SEQ | The part's steps, with its LENGTH and RATE. |
| EDIT | The part's sound. |
| ARP | TB-3PO: writes 303 bass lines for you. |
| LFO | The mixer and master. Hold while pressing a step for a slide. |
| FX | Reverb and delay. |
| ENV | Hold while pressing steps to add an accent. Hold and turn a knob to reset it. |
| SEL | Shows everything on the screen as a list. Means "yes" in questions. |
| GLO | Settings. |
| SAVE | Save. Hold it to copy a pattern, then press a white key to paste. |
| PLAY / REC | Start and stop. Record on and off. |
2 · Your first beat (5 minutes)
When it starts, the screen shows the 909 with every part empty. In the browser version, hit Switch on first.
- Kick: press black key 1 (bass drum), then white keys 1, 5, 9, 13.
- Press PLAY. Four on the floor.
- Clap: black key 7, then white keys 5 and 13.
- Open hats: black key 9, then white keys 3, 7, 11, 15.
- Bass: turn ALGORITHM to 303A, press ARP, press OCT+ until you like the line.
- Shape it: press EDIT. KNOB 1 is the filter, KNOB 2 the resonance.
- Break: ALGORITHM to BREAK, press all 16 white keys.
- Mute a part: HOME, then black key 5 mutes the break. Press again to bring it back.
- Record a filter sweep: 303A, EDIT, press REC, turn KNOB 1 slowly for a bar or two, press REC again. It repeats every loop.
- Save: stop, press SAVE. (It also autosaves a few seconds after you stop.)
3 · 808 and 909 drums
Each machine has 11 tracks, one per black key. Pick a track, then tap white keys to switch steps on and off. Hold ENV while pressing steps to add accents (louder hits on that step).
| Key | 909 | 808 |
|---|---|---|
| 1 | Bass drum | Bass drum |
| 2 | Snare | Snare |
| 3-5 | Low, mid, high tom | Low, mid, high tom (or congas) |
| 6 | Rim shot | Rim shot (or claves) |
| 7 | Clap | Clap (or maracas) |
| 8 | Closed hat | Cowbell |
| 9 | Open hat | Cymbal |
| 10 | Crash | Open hat |
| 11 | Ride | Closed hat |
- Sound: press EDIT to shape the selected track (tune, decay, tone...). The kick has two pages. KIT holds the ACCENT amount.
- Picking a track while playing is silent so you don't add a stray hit. To change that: GLO > KEY SOUND > ALWAYS.
- Closed hats cut off open hats, like the real machines.
- Mute a track: hold HOME + its black key.
- Patterns can be up to 64 steps. OCT+/OCT- move through 16 at a time.
Boom-bap drum recipe (try this)
- 808 kick (808 screen, black key 1): steps 1 and 7 and 11, a long decay for the boom.
- Snare on steps 5 and 13 (beats 2 and 4). Use a 909 snare, or the 808 snare for a softer, older feel.
- Closed hats on 1, 3, 5, 7... (every other step) with a few accents.
- Tuning each track's TUNE and DECAY in EDIT is where the "sound of a record" comes from.
4 · Swing and tempo
- Tempo: hold HOME and turn SELECT, or hold HOME and tap SEQ in time. From the third tap it sets the tempo. While playing, taps also pull the beat to yours.
- Swing: on the HOME screen's knobs (the SWING knob). It delays every second 16th note: 50% = straight, 75% = maximum. It applies to every part.
- Part length and rate: in SEQ, each part has its own LENGTH and RATE. Parts with different lengths drift against each other, which is great for polyrhythms.
Feel recipe (try this)
Classic boom-bap lives around 85-95 BPM with swing in the 55-65% range. Start at 90 BPM, 58% swing, and nudge by ear.
5 · The break chopper
This is the sample-based sound: a drum loop is cut into 8 slices, and the box rearranges them as it plays. It comes with two loops (909 GR and 909 FL). You can add your own.
- Steps: white keys are the bar's 16 steps. Press one to let the break play there.
- Play slices by hand: hold black keys 1-8. Key 9 = backwards, key 10 = half speed, key 11 = stutter.
- Pin a slice to a step: hold a white key and press a black key 1-8. That step now always plays that slice. Do it again to hand it back to the generator. Great for putting the kick and snare slices exactly where you want them.
The generator (SEQ pages GROOVE and RETRIG)
| Knob | What it does |
|---|---|
| COMPLEXITY | How often it jumps to a different slice. 0 = the loop plays straight. |
| ANCHOR | How strongly it keeps the kick and snare slices on beats 1 and 3. |
| ROLL | How often it repeats a slice or moves to the next one. |
| FILL | How much the last bar of a phrase breaks the rules. |
| RETRIG 2X/3X/4X/8X | Chance per bar of stuttering a beat at that rate. |
In SEL's list: PHRASE (2/4/8/16 bars), A LENGTH and B LENGTH (how often a new slice is picked).
The loops (EDIT)
- LOOP A, LOOP B, B CHANCE (chance to switch to loop B in the last bar of a phrase) and PITCH.
- Press EDIT again for FILTER and LEVEL. Middle = off, left = low-pass (muffled), right = high-pass. A high-pass keeps the loop's hats and lets the 808/909 play the kick and snare.
- Loops follow the tempo by speeding up or slowing down, so pitch follows too, like an old sampler.
Your own breaks
Open the break loops page in Chrome or Edge with the FM-1 plugged in. Drop in your WAV files and press Upload. They appear after the built-in loops as BR1, BR2... There's room for about 21 seconds total, roughly nine one-bar loops. Uploading replaces your previous loops. Keep your WAV files, since backups don't hold them.
Boom-bap break recipe (try this)
Set COMPLEXITY low (10-25%), ANCHOR high, and a mid-low-pass FILTER for a dusty feel. Then lay your own 808 kick under it.
6 · Bass lines (303A and 303B)
Two acid-style bass synths, each with its own sound and line.
- Steps: press a white key to add a step. To edit it, press SEQ, hold the step and turn the knobs: KNOB 1 = note, 2 = gate (REST / NOTE / TIE), 3 = accent, 4 = slide.
- Tie holds the previous note through the step. Slide glides into the next note.
- Keyboard: press REC and all 27 keys become a keyboard. Play and it writes the notes. Play a key while holding another to slide. OCT-/OCT+ change octave.
- Free play: SEQ, go to the KEYS page, set FREE PLAY to ON. You can jam on the 303 without writing anything.
- Sound (EDIT): TONE page = CUTOFF, RESO, ENVMOD, DECAY. VOICE page = ACCENT, WAVE (saw or square), DRIVE, SLIDE time.
- SEQ page: LENGTH, RATE, DIRECTION (forward, reverse, ping-pong, random), TRANSPOSE.
TB-3PO: the bass line writer
Pick a 303, press ARP. OCT+ writes a brand-new line. OCT- mutates about a quarter of the steps. GENERATE page: DENS (how many steps play), ACCENT, SLIDE, OCTS (1-3 octave range). SCALE page: ROOT, SCALE (minor, Phrygian, harmonic minor, minor pentatonic, Dorian, major), OCTAVE, and MUTATE (auto-mutates every 1-16 bars). The knobs set up the next OCT+/OCT-, and your current line is never changed until you press one.
Boom-bap bass recipe (try this)
Set ROOT to your key, SCALE to minor pentatonic or Dorian, low DENS (sparse line), 1 octave, a slow filter and a square wave. Keep it simple and under the kick.
6b · KEYS: chords and progressions
KEYS is the Boom Bap Box piano: a 4-voice FM electric piano that replaced the second 303. Turn ALGORITHM to KEYS (third click from 909). It plays chords.
- Play chords: press REC on KEYS and the 27 keys become a polyphonic keyboard. Hold several keys for your own chords. In EDIT > PLAY set CHORD (SINGLE, MAJ, MIN, DOM7, MIN7, MAJ7, SUS4, 5TH) and every key plays that chord from one finger.
- Chord on a step: on SEQ, hold a step and turn KNOB 4 to give that step a chord (AUTO uses the part's CHORD setting).
- Progressions in one button: press ARP on KEYS (it says CHORDS). RHYTHM (HOLD, HALF, OFFBEAT, BOUNCE, 8THS, RANDOM), ACCENT, 7THS (how many chords get a 7th), PROG (1-5-6-4, 1-6-3-7, 1-4-5-1, 1-7-6-5, 1-3-7-4, 2-5-1-1, 1-4-7-3, 1-1-4-5). Second page: KEY, SCALE, OCTAVE. Press OCT+ to write four bars of chords. OCT- varies the rhythm.
- Screen: SEQ shows each chord stacked on a piano roll with a lit piano strip, and the four chord names along the bottom.
- Sound: EDIT > PIANO: TONE, TINE, DECAY, RELEASE. PLAY: ATTACK, DETUNE, TREM, CHORD. Reverb and delay sends live on the mixer.
- Patterns 3, 4, 7 and 8 of the pack already play a progression with a bass on the chord roots.
- MIDI: KEYS answers on its channel (default 3), polyphonic.
7 · Make it human: p-locks, chance and motion
P-locks (a sound per step)
On EDIT, hold a step that's on and turn a sound knob. Only that step gets the new value. Use it for one higher-tuned kick, one open-filter 303 note, one pitched-up break slice. A tap still toggles the step. Clear one lock: hold the step, hold SAVE, turn the knob. Steps with locks show a small notch.
Probability (chance)
Hold a step (SEQ or EDIT) and turn SELECT: chance goes from 100% down to 5%. Keep turning for cycles like 1:2, 2:2, 1:4... "1:4" plays on the first of every four passes. Perfect for ghost snares and hat variations that keep the loop alive.
Knob motion (recorded movement)
Press REC, press PLAY, turn any sound knob. It records per step and glides on playback. A dot in the knob's corner shows it has motion. Turn the knob without REC to take over for one pass. Clear a knob's motion: hold SAVE and turn it.
All three are saved per pattern. There's room for 160 locks and motions across all patterns. When it's full the top line shows MOTION FULL.
8 · Patterns and song
- 32 patterns. A pattern holds every part's steps, length, rate, the break settings, swing and any motion. Sounds, effects and master settings are not part of a pattern.
- HOME shows patterns as boxes (white keys). OCT+ shows 17-32.
- Switching: change happens at the end of the bar while playing. Press a white key (all five parts) or turn PRESETS on a part's screen (just that part).
- Chain: on HOME, hold two white keys at once. It plays every pattern from the first to the second, a bar each, then loops.
- Copy/paste: hold SAVE, then press a white key. Clear a part's pattern: hold SAVE + REC. Clear all five: GLO > CLEAR PATTERN.
- Mutes: on HOME, black keys 1-5 mute parts.
Song mode (HOME pressed twice)
- Up to 192 bars. Each bar sets which pattern every part plays and which parts are muted.
- Press a white key to write a pattern into the selected bar, then it moves to the next bar.
- Black keys 1-5 mute parts in a bar. REPEAT (second page) repeats a bar up to 8 times.
- PLAY on the SONG screen plays it. To record a song live: turn REC on in SONG, press PLAY, and change patterns and mutes as it plays. Each bar is written as it goes by.
- SEL: LENGTH, INSERT BAR, DELETE BAR, CLEAR SONG.
9 · Mix and effects
Mixer (LFO)
- PARTS: level, pan, reverb send and delay send per part (black keys 1-5 pick a part).
- 909 MIX / 808 MIX: same, per drum track.
- MASTER: DRIVE (saturation), COMP (one-knob compressor), PUMP (ducks the mix on every kick for a pumping feel), FILTER (left = low-pass, right = high-pass).
- Hold HOME + a black key mutes a channel.
Effects (FX)
- Reverb: DECAY and TONE. Wide stereo.
- Delay: TIME (1/32 up to dotted half), FEEDBACK, TONE, TAPE. TAPE at the far left is a clean 12-bit digital delay. Turn it up for a wobbly, saturated tape delay. At high feedback it can self-oscillate.
- SEL > MORE: low cut, return levels and PING WIDTH (ping-pong amount).
Playing live
HOME's knobs are made for playing live: TEMPO, SWING, and the master FILTER and PUMP.
10 · Record, save and back up
- Record drums: press black keys while it plays with REC on (you always hear them).
- Record a 303 live: REC on, play the keys. Step by step: REC on while stopped. Each key fills the next step. ENV + key = accent, LFO + key = slide, ENV + OCT = rest, LFO + OCT = tie.
- Save: SAVE saves everything. AUTOSAVE (on by default) saves a few seconds after you stop. It never saves while playing, because it pauses the sound briefly.
- Backup: the backup page saves your project to an .x0b file and restores it. Do this before trying other firmware, since other firmware overwrites the project. Backups don't include your break loops.
- Recording the sound itself: over USB the FM-1 is an audio input, no driver needed. GLO > USB AUDIO > FULL keeps the level full even with the knob down. GLO > OUTPUT > LOUD adds 6 dB.
11 · Gear, MIDI and troubleshooting
- MIDI: CLOCK OUT, NOTES OUT, per-part MIDI channels and CC OUT in GLO. It also follows an external MIDI clock (the tempo turns amber).
- Settings: LIGHTS, KEY SOUND, THEME (green, amber, cyan, red, mono), 2ND CORE, ABOUT Boom Bap Box (version and memory).
- Busy patterns: a very busy pattern can push the FM-1 to its limit. Boom Bap Box protects itself by trimming quality (the 303s get a bit grittier, the 808 fades sooner). GLO > PERFORMANCE shows the load and has a performance test.
- If it crashes: it shows a red screen and restarts on one core. A photo of the crash numbers is the most useful thing for a bug report.
- Back to stock firmware: use "Back to the stock firmware" at the bottom of the installer, or M-VAVE's M-UPGRADE.
- Won't start: there is a rescue path from a Mac in the full manual under Troubleshooting.